H3c-technologies H3C WX6000 Series Access Controllers Manuel d'utilisateur télécharger pdf (Page 166)

11-31

Configuration procedure

Before you make the configuration, make sure the devices can reach each other.

1) Configure Device

# Enable the NQA server and configure a listening service to listen to IP address 10.2.2.2 and UDP port

9000.

<Device> system-view

[Device] nqa server enable

[Device] nqa server udp-echo 10.2.2.2 9000

2) Configure AC

# Create a UDP jitter test group.

<AC> system-view

[AC] nqa entry admin test

[AC-nqa-admin-test] type udp-jitter

# Configure UDP jitter packets to use 10.2.2.2 as the destination IP address and port 9000 as the

destination port.

[AC-nqa-admin-test-udp-jitter] destination ip 10.2.2.2

[AC-nqa-admin-test-udp-jitter] destination port 9000

# Configure the device to perform UDP jitter tests at an interval of 1000 milliseconds.

[AC-nqa-admin-test-udp-jitter] frequency 1000

[AC-nqa-admin-test-udp-jitter] quit

# Start UDP jitter tests.

[AC] nqa schedule admin test start-time now lifetime forever

# Stop UDP jitter tests after a period of time.

[AC] undo nqa schedule admin test

# Display the result of the last UDP jitter test.

[AC] display nqa result admin test

NQA entry (admin admin, tag test) test results:

Destination IP address: 10.2.2.2

Send operation times: 10 Receive response times: 10

Min/Max/Average round trip time: 15/32/17

Square-Sum of round trip time: 3235

Last succeeded probe time: 2008-05-29 13:56:17.6

Extended results:

Packet loss in test: 0%

Failures due to timeout: 0

Failures due to disconnect: 0

Failures due to no connection: 0

Failures due to sequence error: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packet(s) arrived late: 0

UDP-jitter results:

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 178 179

Commentaires sur ces manuels

Pas de commentaire

H3c-technologies H3C WX6000 Series Access Controllers Manuel d'utilisateur Page 166

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs H3c-technologies H3C WX6000 Series Access Controllers