H3c-technologies H3C WX6000 Series Access Controllers Manuel d'utilisateur télécharger pdf (Page 164)

11-29

Min/Max/Average round trip time: 173/173/173

Square-Sum of round trip time: 29929

Last succeeded probe time: 2007-11-22 10:07:28.6

Extended results:

Packet loss in test: 0%

Failures due to timeout: 0

Failures due to disconnect: 0

Failures due to no connection: 0

Failures due to sequence error: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packet(s) arrived late: 0

# Display the history of FTP tests.

[AC] display nqa history admin test

NQA entry (admin admin, tag test) history record(s):

Index Response Status Time

1 173 Succeeded 2007-11-22 10:07:28.6

HTTP Test Configuration Example

Network requirements

As shown in Figure 11-7, configure NQA HTTP tests to test the connection with a specified HTTP server

and the time required to obtain data from the HTTP server.

Figure 11-7 Network diagram for the HTTP tests

Configuration procedure

Before you make the configuration, make sure the devices can reach each other.

# Create an HTTP test group.

<AC> system-view

[AC] nqa entry admin test

[AC-nqa-admin-test] type http

# Specify the IP address of the HTTP server 10.2.2.2 as the destination IP address for HTTP tests.

[AC-nqa-admin-test-http] destination ip 10.2.2.2

# Configure the device to get data from the HTTP server for each HTTP probe operation. (get is the

default HTTP operation type, and this step can be omitted.)

[AC-nqa-admin-test-http] operation get

# Configure HTTP tests to visit website /index.htm.

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 178 179

Pas de commentaire

H3c-technologies H3C WX6000 Series Access Controllers Manuel d'utilisateur Page 164