H3c-technologies H3C WX6000 Series Access Controllers Manuel d'utilisateur Page 109
- Page / 179
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
9-5
Configuring the RMON Alarm Function
Configuration Prerequisites
z If you need to configure that the managed ACs send traps to the NMS when it triggers an alarm
event, you should configure the SNMP agent as described in SNMP in the Network Management
and Monitoring Configuration Guide before configuring the RMON alarm function.
z If the alarm variable is the MIB variable defined in the history group or the Ethernet statistics group,
you must make sure that the RMON Ethernet statistics function or the RMON history statistics
function is configured on the monitored Ethernet interface; otherwise, the creation of the alarm
entry fails, and no alarm event is triggered.
Configuration Procedure
Follow these steps to configure the RMON alarm function:
To do… Use the command… Remarks
Enter system view
system-view
—
Create an event entry in
the event table
rmon event
entry-number [
description
string ] {
log
|
log-trap
log-trapcommunity |
none
|
trap
trap-community }
[
owner
text ]
Optional
Create an entry in the
alarm table
rmon alarm
entry-number alarm-variable
sampling-interval {
absolute
|
delta
}
rising-threshold
threshold-value1 event-entry1
falling-threshold
threshold-value2 event-entry2 [
owner
text ]
Create an entry in the
private alarm table
rmon prialarm
entry-number prialarm-formula
prialarm-des sampling-interval {
absolute
|
changeratio
|
delta
}
rising-threshold
threshold-value1 event-entry1
falling-threshold
threshold-value2 event-entry2
entrytype
{
forever
|
cycle
cycle-period } [
owner
text ]
Required
Use at least one
command.
z A new entry cannot be created if its parameters are identical with the corresponding parameters of
an existing entry. See
Table 9-1 for the parameters to be compared for different entries.
z The system limits the total number of each type of entries (See Table 9-1 for the detailed numbers).
When the total number of an entry reaches the maximum number of entries that can be created,
the creation fails.
Table 9-1 Restrictions on the configuration of RMON
Entry Parameters to be compared
Maximum number of
entries that can be
created
Event
Event description (
description
string), event type (
log
,
trap
,
logtrap
or
none
) and community name (trap-community or
log-trapcommunity)
60
- Configuration Guide 1
- All Rights Reserved 2
- Trademarks 2
- Preface 3
- GUI conventions 4
- Symbols 4
- Network topology icons 4
- Obtaining Documentation 6
- Technical Support 6
- Documentation Feedback 6
- Table of Contents 8
- 2 Typical Network Scenarios 13
- Unified Switch Networking 14
- 3 Feature Matrixes 15
- 4 Command Matrixes 29
- Introduction 61
- Configuring Ping 61
- Tracert 64
- System Debugging 65
- 6 NTP Configuration 69
- NTP Message Format 71
- Operation Modes of NTP 72
- Symmetric peers mode 73
- Broadcast mode 73
- NTP Configuration Task List 74
- NTP Configuration Examples 83
- delay disper 89
- Root delay: 40.00 ms 89
- 7 SNMP Configuration 93
- SNMP Protocol Versions 94
- MIB Overview 94
- SNMP Configuration 95
- Configuring SNMP Logging 97
- Configuring SNMP Traps 98
- Configuring Trap Parameters 99
- Network requirements 101
- Configuration procedure 101
- 8 MIB Style Configuration 104
- 9 RMON Configuration 105
- RMON Groups 106
- Alarm group 107
- Private alarm group 107
- Configuration Procedure 109
- Configuration Prerequisites 109
- Information Center Overview 115
- System Information Format 120
- 11 NQA Configuration 136
- Basic NQA concepts 139
- NQA Configuration Task List 140
- Configuring the NQA Server 141
- Enabling the NQA Client 141
- Creating an NQA Test Group 142
- Configuring DHCP Tests 143
- Configuring DNS Tests 144
- Configuring FTP Tests 145
- Configuring HTTP Tests 146
- Configuring UDP Jitter Tests 147
- Configuration prerequisites 148
- Configuring UDP jitter tests 148
- Configuring SNMP Tests 149
- Configuring TCP Tests 150
- Configuring UDP Echo Tests 150
- Configuring UDP echo tests 151
- Configuring Voice Tests 152
- Scheduling an NQA Test Group 157
- NQA Configuration Examples 158
- 12 Index 178
Produits connexes et manuels pour Routeurs H3c-technologies H3C WX6000 Series Access Controllers
(85 pages)
(13 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.041 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels