H3c-technologies H3C WX6000 Series Access Controllers Manuel d'utilisateur télécharger pdf (Page 163)

11-28

FTp Test Configuration Example

Network requirements

As shown in Figure 11-6, configure NQA FTP tests to test the connection with a specified FTP server

and the time required for AC to upload a file to the FTP server. The login username is admin, the login

password is systemtest, and the file to be transferred to the FTP server is config.txt.

Figure 11-6 Network diagram for FTP tests

Configuration procedure

Before you make the configuration, make sure the devices can reach each other.

# Create an FTP test group.

<AC> system-view

[AC] nqa entry admin test

[AC-nqa-admin-test] type ftp

# Specify the IP address of the FTP server 10.2.2.2 as the destination IP address for FTP tests.

[AC-nqa-admin-test-ftp] destination ip 10.2.2.2

# Specify 10.1.1.1 as the source IP address for probe packets.

[AC-nqa-admin-test-ftp] source ip 10.1.1.1

# Set the FTP username to admin, and password to systemtest.

[AC-nqa-admin-test-ftp] username admin

[AC-nqa-admin-test-ftp] password systemtest

# Configure the device to upload file config.txt to the FTP server for each probe operation.

[AC-nqa-admin-test-ftp] operation put

[AC-nqa-admin-test-ftp] filename config.txt

# Enable the saving of history records.

[AC-nqa-admin-test-ftp] history-record enable

[AC-nqa-admin-test-ftp] quit

# Start FTP tests.

[AC] nqa schedule admin test start-time now lifetime forever

# Stop the FTP tests after a period of time.

[AC] undo nqa schedule admin test

# Display the results of the last FTP test.

[AC] display nqa result admin test

NQA entry (admin admin, tag test) test results:

Destination IP address: 10.2.2.2

Send operation times: 1 Receive response times: 1

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 178 179

Pas de commentaire

H3c-technologies H3C WX6000 Series Access Controllers Manuel d'utilisateur Page 163