H3c-technologies H3C WX6000 Series Access Controllers Manuel d'utilisateur télécharger pdf (Page 160)

11-25

[AC] nqa schedule admin test start-time now lifetime forever

# Stop the ICMP echo tests after a period of time.

[AC] undo nqa schedule admin test

# Display the results of the last ICMP echo test.

[AC] display nqa result admin test

NQA entry (admin admin, tag test) test results:

Destination IP address: 10.2.2.2

Send operation times: 10 Receive response times: 10

Min/Max/Average round trip time: 2/5/3

Square-Sum of round trip time: 96

Last succeeded probe time: 2007-08-23 15:00:01.2

Extended results:

Packet loss in test: 0%

Failures due to timeout: 0

Failures due to disconnect: 0

Failures due to no connection: 0

Failures due to sequence error: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packet(s) arrived late: 0

# Display the history of ICMP echo tests.

[AC] display nqa history admin test

NQA entry (admin admin, tag test) history record(s):

Index Response Status Time

370 3 Succeeded 2007-08-23 15:00:01.2

369 3 Succeeded 2007-08-23 15:00:01.2

368 3 Succeeded 2007-08-23 15:00:01.2

367 5 Succeeded 2007-08-23 15:00:01.2

366 3 Succeeded 2007-08-23 15:00:01.2

365 3 Succeeded 2007-08-23 15:00:01.2

364 3 Succeeded 2007-08-23 15:00:01.1

363 2 Succeeded 2007-08-23 15:00:01.1

362 3 Succeeded 2007-08-23 15:00:01.1

361 2 Succeeded 2007-08-23 15:00:01.1

DHCP Test Configuration Example

Network requirements

As shown in Figure 11-4, configure NQA DHCP tests to test the time required for AC to obtain an IP

address from the DHCP server (Device).

Figure 11-4 Network diagram for DHCP test

Configuration procedure

# Create a DHCP test group and specify interface VLAN-interface 2 to perform NQA DHCP tests.

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 178 179

Pas de commentaire

H3c-technologies H3C WX6000 Series Access Controllers Manuel d'utilisateur Page 160