H3c-technologies H3C WX5500E Series Access Controllers Manuel d'utilisateur Page 164
- Page / 221
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
153
Ste
p
Command
Remarks
3. Add a recognizable OUI
address.
voice vlan mac-address oui mask
oui-mask [ description text ]
Optional.
By default, each voice VLAN has
default OUI addresses configured.
For the default OUI addresses of
different vendors, see Table 14.
4. Enter interface view.
interface interface-type
interface-number
N/A
5. Configure the port to operate
in manual voice VLAN
assignment mode.
undo voice vlan mode auto
By default, the manual voice VLAN
assignment mode is disabled.
6. Assign the access, trunk, or
hybrid port in manual voice
VLAN assignment mode to the
voice VLAN.
For the configuration procedure,
see "Assigning an access port to a
VLAN," "Assigning a trunk port to
a VLAN," or "Assigning a hybrid
port to a VLAN."
After you assign an access port to
the voice VLAN, the voice VLA
N
becomes the PVID of the port
automatically.
7. Configure the voice VLAN as
the PVID of the trunk or hybrid
port.
For the configuration procedure,
see "Assigning a trunk port to a
VLAN," or "Assigning a hybrid
port to a VLAN."
Optional.
This operation is required for
untagged inbound voice traffic
and prohibited for tagged inbound
voice traffic.
8. Enable voice VLAN on the
port.
voice vlan vlan-id enable By default, voice VLAN is disabled.
Displaying and maintaining voice VLANs
Task Command
Remarks
Display the voice VLAN state.
display voice vlan state [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the OUI addresses that the
system supports.
display voice vlan oui [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Voice VLAN configuration examples
This section provides voice VLAN configuration examples.
Automatic voice VLAN assignment mode configuration
example
Network requirements
As shown in Figure 46:
- H3C WX5540E Access Controller 1
- Switching Engine 1
- Preface 3
- Symbols 4
- Network topology icons 4
- Port numbering in examples 4
- Obtaining documentation 5
- Technical support 5
- Documentation feedback 5
- Contents 6
- Switch A Switch B 14
- Switch C 14
- Enabling auto power-down 17
- Bulk configuring interfaces 30
- Configuring MAC Information 39
- Operational key 44
- Configuration classes 44
- Reference port 44
- Link aggregation modes 45
- Choosing a reference port 46
- Configuring port isolation 63
- STP protocol packets 65
- Basic concepts in STP 66
- Path cost 67
- STP timers 71
- MSTP features 73
- MSTP basic concepts 73
- MST region 74
- Regional root 75
- Common root bridge 75
- Port roles 75
- How MSTP works 76
- STP configuration task list 78
- RSTP configuration task list 79
- PVST configuration task list 80
- MSTP configuration task list 81
- Configuring an MST region 82
- Configuring edge ports 89
- Performing mCheck 96
- Configuring digest snooping 97
- <DeviceB> system-view 99
- Configuration prerequisites 100
- Configuration procedure 100
- Configuration example 101
- Enabling BPDU guard 101
- Enabling root guard 102
- Enabling loop guard 102
- Enabling TC-BPDU guard 103
- Enabling BPDU drop 104
- MSTP configuration example 105
- PVST configuration example 109
- Configuring BPDU tunneling 113
- Enabling BPDU tunneling 116
- Network requirements 117
- Configuring VLANs 120
- VLAN frame encapsulation 121
- VLAN types 122
- Protocols and standards 122
- Configuring port-based VLANs 125
- Frame handling on a port 126
- Verifying the configuration 130
- Configuring MAC-based VLANs 131
- Configuration considerations 136
- Configuration guidelines 142
- Task Command 143
- Remarks 143
- Configuring super VLANs 144
- Name: VLAN 0005 148
- Tagged Ports: none 148
- Untagged Ports: 148
- Configuring voice VLANs 158
- VLAN assignment mode 162
- Configuring GVRP 169
- GARP timers 170
- GARP PDU format 171
- Introduction to GVRP 172
- GVRP registration modes 172
- GVRP configuration task list 173
- Configuring GVRP functions 173
- Configuring the GARP timers 174
- GVRP configuration examples 176
- Configuring LLDP 181
- LLDPDUs 182
- LLDP-MED TLVs 184
- Working mechanism 185
- LLDP configuration task list 186
- Enabling LLDP polling 188
- Configuring LLDP trapping 193
- LLDP configuration examples 194
- Overview 199
- Configuring MVRP 203
- MRP messages 204
- MRP timers 205
- MVRP configuration task list 206
- Enabling MVRP 207
- Configuring MRP timers 208
- Enabling GVRP compatibility 209
- Configuring Device B 212
- Configuring Device C 213
- Configuring Device D 214
- 1(default), 10 219
Produits connexes et manuels pour Routeurs H3c-technologies H3C WX5500E Series Access Controllers
(4 pages)
(18 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.067 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels