H3c-technologies H3C WX5500E Series Access Controllers Manuel d'utilisateur télécharger pdf (Page 141)

130

Figure 39 Network diagram

Configuration considerations

• Create VLANs 100 and 200.

• Associate IP subnets with the VLANs.

• Assign ports to the VLANs.

Configuration procedure

# Associate IP subnet 192.168.5.0/24 with VLAN 100.

<DeviceC> system-view

[DeviceC] vlan 100

[DeviceC-vlan100] ip-subnet-vlan ip 192.168.5.0 255.255.255.0

[DeviceC-vlan100] quit

# Associate IP subnet 192.168.50.0/24 with VLAN 200.

[DeviceC] vlan 200

[DeviceC-vlan200] ip-subnet-vlan ip 192.168.50.0 255.255.255.0

[DeviceC-vlan200] quit

# Configure interface GigabitEthernet 1/0/11 to permit packets of VLAN 100 to pass through.

[DeviceC] interface gigabitethernet 1/0/11

[DeviceC-GigabitEthernet1/0/11] port link-type hybrid

[DeviceC-GigabitEthernet1/0/11] port hybrid vlan 100 tagged

Please wait... Done.

[DeviceC-GigabitEthernet1/0/11] quit

# Configure interface GigabitEthernet 1/0/12 to permit packets of VLAN 200 to pass through.

[DeviceC] interface gigabitethernet 1/0/12

[DeviceC-GigabitEthernet1/0/12] port link-type hybrid

[DeviceC-GigabitEthernet1/0/12] port hybrid vlan 200 tagged

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 220 221

Pas de commentaire

H3c-technologies H3C WX5500E Series Access Controllers Manuel d'utilisateur Page 141