H3c-technologies H3C WX5500E Series Access Controllers Manuel d'utilisateur Page 95
- Page / 104
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
87
Ste
p
Command
Remarks
2. Create a remote source
group.
mirroring-group group-id remote-source
By default, no remote source
group exists on a device.
Configuring source ports for a remote source group
CAUTION:
Do not assign a source port to the remote probe VLAN.
Either you can configure a list of source ports for a mirroring group in system view, or you can assign only
the current port to the a mirroring group as a source port in interface view. To assign multiple ports to the
mirroring group as source ports in interface view, repeat the step.
When you configure source ports for the remote source group, follow these guidelines:
• A mirroring group can contain multiple source ports.
• On the WX5540E switching engine, one mirroring resource is used for mirroring unidirectional
traffic on a source port and two mirroring resources are used for mirroring bidirectional traffic on a
source port. A source port on the WX5540E switching engine is assigned a maximum of four
mirroring resources. Therefore, a port, when serving as a unidirectional source port, can be added
to up to four mirroring groups. When serving as a bidirectional port can be added to up to two
mirroring groups, and when serving as a bidirectional source port and two unidirectional ports can
be added to up to three mirroring groups.
To configure source ports for a remote source group in system view:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Configure source ports for a
remote source group.
mirroring-group group-id
mirroring-port mirroring-port-list
{ both | inbound | outbound }
By default, no source port is
configured for a remote source
group.
To configure a source port for a remote source group in interface view:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure the current port as
a source port for a remote
source group.
[ mirroring-group group-id ]
mirroring-port { both | inbound |
outbound }
By default, a port does not serve as
a source port for any remote
source group.
Configuring source CPUs for a remote source group
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Configure source
CPUs for a remote
source group.
mirroring-group group-id
mirroring-cpu slot slot-number-list
{ both | inbound | outbound }
By default, no source CPU is
configured for a remote source group.
- H3C WX5540E Access Controller 1
- Switching Engine 1
- Preface 3
- Symbols 4
- Network topology icons 4
- Port numbering in examples 4
- Obtaining documentation 5
- Technical support 5
- Documentation feedback 5
- Contents 6
- Ping example 9
- Test procedure 10
- Tracert 11
- System debugging 12
- Debugging a feature module 13
- Ping and tracert example 14
- Configuring NTP 16
- NTP message format 17
- Operation modes 19
- Symmetric peers mode 20
- Broadcast mode 20
- NTP configuration task list 21
- Configuration guidelines 25
- Configuration prerequisites 27
- NTP configuration examples 32
- Root delay: 15.00 ms 34
- delay disper 38
- Root delay: 40.00 ms 38
- Root delay: 31.00 ms 42
- Root delay: 0.00 ms 42
- Overview 44
- System information formats 47
- # ps -ae 61
- # kill -9 147 61
- # syslogd -r & 61
- Configuring SNMP 62
- SNMP configuration task list 63
- Slot IDInterface Type 67
- Offset Chassis ID 67
- Configuring SNMP logging 68
- Configuring SNMP traps 68
- Enabling SNMP traps 69
- SNMP configuration examples 71
- SNMPv3 configuration example 72
- Configuring MIB style 76
- Configuring RMON 77
- History group 78
- Event group 78
- Alarm group 78
- Private alarm group 79
- Configuring port mirroring 87
- Local port mirroring 88
- Remote port mirroring 88
- Verifying the configuration 100
- Network requirements 100
- Configuration procedure 101
- A C D E H I N O P S T 104
Produits connexes et manuels pour Routeurs H3c-technologies H3C WX5500E Series Access Controllers
(221 pages)
(18 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.136 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels