H3c-technologies H3C WX5500E Series Access Controllers Manuel d'utilisateur télécharger pdf (Page 45)

Table 1 System information levels

Severity

value

Description

Corresponding

keyword in

commands

Emergency 0

The system is unusable. For example, the system

authorization has expired.

emergencies

Alert 1

Action must be taken immediately. For example, traffic on

an interface exceeds the upper limit.

alerts

Critical 2

Critical condition. For example, the device temperature

exceeds the upper limit, the power module fails, or the fan

tray fails.

critical

Error 3 Error condition. For example, the link state changes. errors

Warning 4

Warning condition. For example, the device is being

logged into through the Web interface, or the memory

resources are used up.

warnings

Notification 5

Normal but significant condition. For example, a terminal

logs in to the device, or the device reboots.

notifications

Information

Informational message. For example, a command or a

ping operation is executed.

informational

Debug 7 Debugging message. debugging

System information channels and output destinations

Table 2 shows the information channels and output destinations.

The system supports ten channels. By default, channels 0 through 6, and channel 9 are configured with

channel names and output destinations. You can change these default settings as needed. You can also

configure channels 7 and 8 and associate them with specific output destinations to meet your needs.

You can use the info-center channel name command to change the name of an information channel.

Each output destination receives information from only one information channel, but each information

channel can output information to multiple output destinations.

Table 2 Default information channels and output destinations

Information

channel

number

Default

channel name

Default output destination

System information received by

default

0 console Console Log, trap and debugging information

1 monitor Monitor terminal Log, trap and debugging information

2 loghost Log host Log, trap and debugging information

3 trapbuffer Trap buffer Trap information

4 logbuffer Log buffer Log information

5 snmpagent SNMP module Trap information

6 channel6 Web interface Log information

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

H3c-technologies H3C WX5500E Series Access Controllers Manuel d'utilisateur Page 45

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs H3c-technologies H3C WX5500E Series Access Controllers