H3c-technologies H3C WX5500E Series Access Controllers Manuel d'utilisateur télécharger pdf (Page 64)

Task Remarks

Configuring SNMP logging Optional.

Configuring SNMP traps Optional.

Configuring SNMP basic parameters

SNMPv3 differs from SNMPv1 and SNMPv2c in many ways. Their configuration procedures are

described in separate sections.

Configuring SNMPv3 basic parameters

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enable the SNMP agent.

snmp-agent

Optional.

By default, the SNMP agent is

disabled.

You can also enable the SNMP

agent by using any command that

begins with snmp-agent except the

snmp-agent calculate-password

and snmp-agent ifmib long-ifindex

enable commands.

3. Configure system information

for the SNMP agent.

snmp-agent sys-info { contact

sys-contact | location sys-location

| version { all | { v1 | v2c |

v3 }* } }

Optional.

The defaults are as follows:

• Contact—Hangzhou H3C Tech.

Co., Ltd.

• Location—Hangzhou China.

• Version—SNMPv3.

4. Configure the local engine ID.

snmp-agent local-engineid

engineid

Optional.

The default local engine ID is the

company ID plus the device ID.

After you change the local engine

ID, the existing SNMPv3 users

become invalid, and you must

re-create the SNMPv3 users.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

H3c-technologies H3C WX5500E Series Access Controllers Manuel d'utilisateur Page 64

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs H3c-technologies H3C WX5500E Series Access Controllers