H3c-technologies H3C WX5500E Series Access Controllers Manuel d'utilisateur télécharger pdf (Page 70)

Ste

Command

Remarks

2. Configure a target host.

snmp-agent target-host trap

address udp-domain ip-address

[ udp-port port-number ] [ dscp

dscp-value ] params securityname

security-string [ v1 | v2c | v3

[ authentication | privacy ] ]

N/A

3. Configure the source address

for traps.

snmp-agent trap source

interface-type interface-number

Optional.

By default, SNMP chooses the IP

address of an interface to be the

source IP address of traps.

4. Extend the standard

linkUp/linkDown traps.

snmp-agent trap if-mib link

extended

Optional.

By default, standard

linkUp/linkDown traps are used.

Extended linkUp/linkDown traps

add interface description and

interface type to standard

linkUp/linkDown traps. If the NMS

does not support extended SNMP

messages, use standard

linkUp/linkDown traps.

5. Configure the trap queue size.

snmp-agent trap queue-size size

Optional.

The default trap queue size is 100.

When the trap queue is full, the

oldest traps are automatically

deleted for new traps.

6. Configure the trap holding

time.

snmp-agent trap life seconds

Optional.

The default setting is 120 seconds.

A trap is deleted when its holding

time expires.

Displaying and maintaining SNMP

Task Command

Remarks

Display SNMP agent system

information, including the

contact, physical location, and

SNMP version.

display snmp-agent sys-info [ contact | location

| version ]* [ | { begin | exclude | include }

regular-expression ]

Available in any view.

Display SNMP agent statistics.

display snmp-agent statistics [ | { begin |

exclude | include } regular-expression ]

Available in any view.

Display the local engine ID.

display snmp-agent local-engineid [ | { begin |

exclude | include } regular-expression ]

Available in any view.

Display SNMP group

information.

display snmp-agent group [ group-name ] [ |

{ begin | exclude | include } regular-expression ]

Available in any view.

Display basic information

about the trap queue.

display snmp-agent trap queue [ | { begin |

exclude | include } regular-expression ]

Available in any view.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

H3c-technologies H3C WX5500E Series Access Controllers Manuel d'utilisateur Page 70

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs H3c-technologies H3C WX5500E Series Access Controllers