H3c-technologies H3C SecPath F100-C-EI Manuel d'utilisateur télécharger pdf (Page 74)

Installation Manual

H3C SecPath F100-C-EI Firewall

Chapter 5 Maintaining Software

5-24

Exit and reboot, are you sure?[Y/N]y

System is rebooting now ...

3) Configure a new user password in system view after the

system reboots.

<H3C> system-view

[H3C] user-interface console 0

[H3C-ui-console0] authentication-mode password

[H3C-ui-console0] set authentication password simple

123456

The above information indicates that the Console port

authentication mode is password authentication, and the password for

the console port is 123456, in plain text..

 Note:

z After the system restarts, it runs using the initial configuration, but

the previous configuration file is still stored in the storage medium.

To restore to the previous configuration, use the display

saved-configuration command to display the previous

configuration, and then copy and execute the previous

configuration.

z If the password is stored in plain text, you can use the display

current-configuration command to view the password in the

current configuration. If you use the cipher keyword in the set

authentication password command, for example, set

authentication password cipher 123456, the password is stored

in cipher text.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79

Pas de commentaire

H3c-technologies H3C SecPath F100-C-EI Manuel d'utilisateur Page 74