H3c-technologies H3C SecPath F100-C-EI Manuel d'utilisateur télécharger pdf (Page 36)

Installation Manual

H3C SecPath F100-C-EI Firewall

Chapter 3 Installing the Firewall

3-7

z The neutral point of the socket must be grounded reliably.

Normally, the neutral point of the power source in a building

was buried in the earth during construction and cabling.

z Make sure that the power source in the building is properly

grounded before connecting the AC power cord.

III. Connect the AC power cord

1) Make sure the PGND is properly connected to earth ground.

2) Connect one end of the AC power cord shipped with the

device to the AC input socket on the chassis and the other

end to the AC mains supply.

Figure 3-7 Connecting the AC power cord

3) Check the status of the PWR LED on the front panel. For

LED status description, refer to

Table 1-2 on page 1-5.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 78 79

Pas de commentaire

H3c-technologies H3C SecPath F100-C-EI Manuel d'utilisateur Page 36