H3c-technologies H3C SecPath F100-C-EI Manuel d'utilisateur Page 61

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 79
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 60
Installation Manual
H3C SecPath F100-C-EI Firewall
Chapter 5 Maintaining Software
5-11
Figure 5-5 Set up an upgrade environment through TFTP
2) Start the TFTP server
Start the TFTP server on the PC connected to the Ethernet
interface on the firewall and set the path for the file to be downloaded.
3) Configure the firewall
Step 1: Access the TFTP configuration status.
Start the firewall and enter the Boot menu (see section
5.1 ).
Select 2 to enter the Net Port Download Menu. The system displays
the following message:
Net Port Download Menu:
1: Change Net Parameter
2: Download From Net
3: Exit to Main Menu
Enter your choice(1-3):
Step 2: Configure TFTP parameters.
Vue de la page 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 78 79

Commentaires sur ces manuels

Pas de commentaire