H3c-technologies H3C SecPath F100-C-EI Manuel d'utilisateur télécharger pdf (Page 31)

Installation Manual

H3C SecPath F100-C-EI Firewall

Chapter 3 Installing the Firewall

3-2

3.2 Installing the F100-C-EI

The F100-C-EI can be installed either in a standard 19-inch rack

or on a workbench.

3.2.1 Installing the Firewall on a Workbench

If you do not have a standard 19-inch rack, you can install your

device on a workbench. To prevent any damage, observe the

following:

z Make sure that the length and width of the workbench are

enough to hold the firewall chassis.

z Make sure that the workbench is stable and grounded well.

z Make sure that the workstation is sturdy enough to support

the weight of the firewall and installation accessories.

z Reserve at least 10 cm of clearance around the firewall for

heat dissipation.

z Do not place any object on the firewall chassis to avoid

damaging the device and lowering the heat dissipation.

3.2.2 Installing the Firewall in a Rack

I. Install mounting brackets on the firewall

1) Mounting bracket structure

Figure 3-2 Mounting bracket structure

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 78 79

Pas de commentaire

H3c-technologies H3C SecPath F100-C-EI Manuel d'utilisateur Page 31