H3c-technologies H3C SecPath F5000-A5 Firewall Manuel d'utilisateur télécharger pdf (Page 27)

Figure 11 Connecting the grounding cable to the grounding hole of firewall

NOTE:

• The resistance reading should be smaller than 5 ohms between firewall chassis and the ground.

• To guarantee the grounding effect, use the grounding cable provided with the firewall to connect to the

grounding strip in the equipment room as long as possible.

Installing an MPU

1. Locate the slot to install the MPU.

2. Remove the filler panel from slot 0. For how to remove a filler panel, see "Removing a filler panel."

3. Gently pu

sh the MPU into the slot along the slide rails until the positioning pins on the MPU are

seated in the positioning holes on the backplane. Then push the ejector levers inward to lock the

MPU in position.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 120 121

Pas de commentaire

H3c-technologies H3C SecPath F5000-A5 Firewall Manuel d'utilisateur Page 27