H3c-technologies H3C SecPath F5000-S Firewall Manuel d'utilisateur télécharger pdf (Page 41)

Ste

Command

Remarks

Configure dynamic NAT.

Configure an address pool:

nat address-group group-number

start-address end-address [ level level ]

Available in system view.

Configure No-PAT by associating an

ACL with an IP address pool on the

outbound interface for translating only

IP addresses:

nat outbound [ acl-number ]

[ address-group group-number

[ vpn-instance vpn-instance-name ]

[ no-pat ] ] [ track vrrp

virtual-router-id ]

Available in interface view.

Configure a security zone on

the default virtual device (VD).

Enter security zone view:

zone name zone-name [ id zone-id ]

Available in system view.

By default, the default VD has five

security zones: Management (ID =

0), Local (ID = 1), Trust (ID = 2),

DMZ (ID = 3), and Untrust (ID = 4).

Add an interface to the security zone:

import interface interface-type

interface-number [ vlan vlan-list ]

Available in security zone view.

By default, only GigabitEthernet

0/0 is added to the security zone

Management.

Save the running configuration

to the configuration file.

save [ safely ]

Available in any view.

You can specify the file as the

configuration file for the next

startup.

Display the running

configuration.

display current-configuration Available in any view.

Configuring basic settings in the Web interface

1. Select Wizard from the navigation tree.

2. Click the Basic Device Information hyperlink.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 85 86

Commentaires sur ces manuels

Pas de commentaire

H3c-technologies H3C SecPath F5000-S Firewall Manuel d'utilisateur Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Sécurité H3c-technologies H3C SecPath F5000-S Firewall