H3c-technologies H3C WX5000 Series Access Controllers Manuel d'utilisateur télécharger pdf (Page 10)

1-4

Item Description

Max input voltage range

For AC power input: 90 VAC to 264 VAC, 47 Hz to 63 Hz

For DC power input: –36 VDC to –72 VDC

Power consumption 53.4 W to 67.7 W

z You are not recommended to use an AC power module with a DC power module on the device.

z No AC or DC power module is provided with the access controller. You need to prepare them

yourself.

Components

LEDs

The WX5002V2 provides LEDs on the front panel, as shown in Figure 1-4.

Figure 1-4 LEDs of the WX5002V2

(1) 1000 Mbps LED of gigabit Ethernet interface (1000M)

(2) System status LED (SYS) (3) Status LED of PSU 1 (PWR1)

(4) 10/100 Mbps LED of gigabit Ethernet interface (10/100M)

(5) LED of the expansion card (MOD) (6) Status LED of PSU 2 (PWR2)

Table 1-6 Description of LEDs

LEDs Silkscreen Status Description

Solid green

PSU 1 supplies power to the system

normally.

Solid yellow PSU 1 is faulty.

LED of PSU 1

(green/yellow)

PWR1

Off No PSU is installed in the slot.

Solid green

PSU 2 supplies power to the system

normally.

Solid yellow PSU 2 is faulty.

LED of PSU 2

(green/yellow)

PWR2

Off No PSU is installed in the slot.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 84 85

Pas de commentaire

H3c-technologies H3C WX5000 Series Access Controllers Manuel d'utilisateur Page 10