H3c-technologies H3C LSWM1WCM10 Access Controller Module Manuel d'utilisateur télécharger pdf (Page 18)

Figure 9 Connect To dialog box

3. Select a serial port from the Connect using drop-down list. Be sure to select the serial port to which

the console cable is actually connected. Then click OK.

Figure 10 Set serial port parameters

NOTE:

To use the default settings, click Restore Defaults.

4. Click OK. The HyperTerminal window appears, as shown below.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 49 50

Pas de commentaire

H3c-technologies H3C LSWM1WCM10 Access Controller Module Manuel d'utilisateur Page 18