H3c-technologies H3C Intelligent Management Center Manuel d'utilisateur

H3C Intelligent Management CenterProbe Installation Guide Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software versi

5 NOTE: With a password configured, you are asked to enter the password when adding a new IMC probe.If you do not want to use a password, enter n w

6 3 FAQ How can I launch the IMC probe manually after the installation? To launch the IMC probe manually, perform the following operations: 1. Enter

7 Solution 2 1. Identify whether all the required software packages are installed in the operating system by using the following commands: { rpm –q

Copyright © 2007-2014, Hangzhou H3C Technologies Co., Ltd. and its licensors All rights reserved No part of this manual may be reproduced or transmitt

Preface H3C Intelligent Management Center (IMC) Probe Installation Guide is organized as follows: Configuration guide Content 1 Overview Describes th

Obtaining documentation You can access the most up-to-date H3C product documentation on the World Wide Web at http://www.h3c.com. Click the links on t

i Contents 1 Overview ································································································································

1 1 Overview Use the IMC probe to collect logs for the following service components: • NTA/UBA • APM This document describes in detail the installat

2 2 Installing the IMC probe Installation preparations Hardware requirements Install the IMC probe on an independent server. Table 1 lists the basic

3 Installation environment verification Before installing the IMC probe, verify that all requirements listed in Table 2 are met. Table 2 Installation

4 4. Specify a monitoring network adapter card (enter the name of a network adapter card of the server where the IMC probe is to be installed). Figur