H3c-technologies H3C S9500E Series Switches Manuel d'utilisateur télécharger pdf (Page 139)

129

Figure 74 Generic label

(1) Dividing line on the label (2) Cut dotted line

Labels for devices

A device label is used to identify the device name, model, address, installation date, and so on.

Filling in labels

You can print or write desired contents on labels. H3C recommends that you print labels.

To print labels, select a label printer and a proper label template as needed. For more information about

using a label printer, see the user guide of the printer.

To write labels, use black markers. A marker has two nibs. Be sure to use the smaller nib to write labels.

Affixing labels

After printing or writing a label, remove the label from the bottom page and affix it to the signal cable,

or the identification plate of the power cord.

Affixing a label to a signal cable

Typically, a label is affixed 2 cm (0.79 in) away from the connector on a signal cable. You can affix the

label to other positions as needed. Figure 75 sho

ws how to affix a label when a cable is laid vertically.

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 153 154

Pas de commentaire

H3c-technologies H3C S9500E Series Switches Manuel d'utilisateur Page 139