H3c-technologies H3C WA2600 Series WLAN Access Points Manuel d'utilisateur télécharger pdf (Page 15)

Figure 5 Adjust the tilt of the AP

(1) Mounting plate (2) Bolt

(3) Mounting slot (allows bracket rotation) (4) V-shaped bracket

Pole mounting is suitable for rooftop installation.

To install the AP on a pole:

1. Vertically fix the pedestal of the pole to the rooftop or a cement pier on the rooftop with expansion

screws. See Figure 6.

Figure 6 Pole and pedestal

2. Fix the V-shaped bracket onto the mounting plate with the bolt.

3. Attach another V-shaped bracket to the pole, making sure that the two V-shaped bracket are level.

Insert two long bolts through the screw holes on the two brackets and attach the bolts, nuts, and flat

and spring washers. See Figure 7.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

Pas de commentaire

H3c-technologies H3C WA2600 Series WLAN Access Points Manuel d'utilisateur Page 15