H3c-technologies H3C WA2600 Series WLAN Access Points Manuel d'utilisateur Page 30
- Page / 58
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
7-8
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Enter your choice(0-9):
Select 6 to disable the AP from booting with the default configuration. It boots with null configuration,
shown as follows:
Enter your choice(0-9):6
Flag Set Success.
Fit/Fat Working Mode Switching
The AP can work in the fat mode, or cooperate with an AC or a US to work in the fit mode, and it can
switch between the fit mode and the fat mode.
Before working mode switching, identify the current working mode of the AP to determine whether it
needs to perform a mode switching.
Switching the Working Mode Through the BootWare Menu
The working mode of the AP depends on the main application file in its Flash. If the main application file
in the Flash is XXXX_fit.bin, the AP works in the fit mode; if the main application file in the Flash is
XXXX_fat.bin, the AP works in the fat mode.
When setting the working mode through the BootWare menu, you need to judge whether the main
application file in the Flash is consistent with the working mode. During the upgrade process, do not
change the main application filename, thus to avoid inconsistency of the working mode that has been
configured and the current working mode.
Select 4 from the BootWare main menu to enter the file control submenu:
==============================<File CONTROL>==============================
|Note:the operating device is flash |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Delete File |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-3):
The following example illustrates the switching from the fat mode to fit mode.
1) Display the application program type in the BootWare menu:
Select 2 to enter the application program type submenu:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
- Getting Started Guide 1
- All Rights Reserved 2
- Trademarks 2
- Environmental Protection 2
- Table of Contents 3
- 1 About This Document 5
- Related Documentation 6
- Conventions 6
- Obtaining Documentation 7
- Documentation Feedback 8
- 2 Product Overview 9
- 3 Installation Preparations 10
- Installation Site Selection 11
- Power Supply 11
- 4 Installing an AP 13
- 5 Logging In to an AP 14
- Logging In to an AP 15
- Configuring Basic Functions 16
- Configuring WLAN Service 19
- 7 Software Maintenance 23
- BootWare Menus 24
- BootWare Submenus 27
- File control submenu 28
- BootWare operation submenu 28
- XMODEM Overview 33
- Upgrading an Application 35
- Download successfully! 36
- 7546496 bytes downloaded! 36
- Input the File Name: 36
- Backing Up an Application 39
- Upgrade the application 44
- Displaying File List 45
- Downloading a File 46
- Uploading a File 46
- Removing a File 47
- Restart the AC or US 50
- Displaying All Files 51
- Dealing with Password Loss 53
- BootWare Password Loss 54
- Super Password Loss 54
- 8 Troubleshooting 56
- 9 Index 58
Produits connexes et manuels pour Routeurs H3c-technologies H3C WA2600 Series WLAN Access Points
(31 pages)LevelOne 570746 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Switche sieciowe LevelOne 570746.
Dostarczamy 1 pdf podręczników LevelOne 570746 do pobrania za darmo według typów dokumentów: Arkusz Danych
Commentaires sur ces manuels